RENOVA RAIL s.r.o.

Ústí nad Orlicí
Česká republika

[ Back ] - [ Presentation of the company ] - [ Space gauge - PSR 1 ] - [ adress ] - [ e-mail ] - [ Deutsch ]

SPACE GAUGE OF THE POINT CROSING - TYPE PSR 1

[ detail (84k) ]

This space measuring and gauging PSR 1 can measure guickly and accurate the state of the trajectory of the whels goink over the point crossing.The point crossing can be masured straight in the trackage or out of the trackage. By means of this SPACE GAUGING (MAEASURING) PSR 1 you can inspektand take over the new or renovated point crossings.

The space gauge and measuring - PSR 1
bases on the monitoring of the weel set going over the rails and the point crossing. By means of masuring and gauging you can ascertain spatial differences wosening confort and smooth of the run and lifetime of the rails and poit crossing. 

Space gauge - PSR 1 is made of the structural parts for guick and very precise detection of the trajectory state. this is possible by the guick assembly of arresting keys, or screws with arresting wheels. It facilitates very easy and gick readjustment of rhe gauge for different types of the poin crossings.
Mecanical strenght provides stability and accuracy of the It is made of stainstel material with great mechanical ruggedness and anticorrosion. gauge in handling.

[ detail (90k) ]

[ detail (94k) ]

 So, the gauge keeps up its shape although is often used and contacts the rails. 

The space gauge simulates the run passing over the rail and the point crossing. Its shape was approved by the DIVISION of  the CZECH RAILWAYS.

The shape of the gauge correspond to the statistical mid-wear of the worn-out wheels of the rail vehicles on the CZECH RAILWAYS. The gauge - PSR 1 can be adapted to the differend profiles of the wheels.

THE GAUGE - PSR 1  was successfully proved in practice and awarded with "THE CERTIFICATE OF QUALIFICATION", it means that it is approved for profiles testing and masuring of the point crossing and contct surfaces and their spacing on THE CZECH RAILWAYS.

[ detail (105k) ]

Technical data

Lenght of the leading base	1550 mm
accuracy of the measuring	±0,5 mm
Mass	4,53 kg
Number of the persons operating the gauge	1 pracovník
Working temperature	-10^oC  -:-  +40^oC
Move speed of the gauge	unlimited